English CA
Français CA
English US
Español US
Extended pivot joint set
In stock
- Adjustable from 15 degrees up to 260 degrees
- Compatible with 28 mm pipes
- Nuts and bolts are included, but packaged separately
- Assembly required
The HJ-6A is a black metal joint set that allows you to create a two-pipe intersection with an adjustable angle up to 260 degrees. This joint set allows working with a wider angle radius than the HJ-6 allows. It can be used for many applications such as the creation of angular sides and top or V-shaped racks with angles wider than 90 degrees. The distance created between the two pipes is used for supporting pannels or manufacturing parts.
To assemble an HJ-6A you need to combine two H-6A and two H-6 together with three M6-25B bolts and three M6-N nuts.
Installation Steps:
See the installation steps tab to view how to assemble this connector.
Antistatic Version (ESD):
An electric conductivity version if offered if you wish to build antistatic structures: HJ-6ANP
Want to reuse parts of your old system?
The HJ-6A Flexpipe joint set is compatible with many other pipe and connector systems. Check the technical information tab to know which systems are compatible and none-compatible with our parts.
Please note that nuts and bolts are included, but packaged separately. Assembly is required.
| Frequency of Use | Very low |
|---|---|
| Electric Conductivity (ESD) | No |
| Manufacturing Technique | Stamping and deburring |
- Ensure you have the following parts:
- Take the two H-6 connectors and group them around the first pipe.
- Fix the connectors by placing an M6-25B with an M6-N in the corresponding openings until it's firmly attached to the pipe.
- Group together with the two H-6A connectors around the second pipe and fix the connectors with an M6-25B and an M6-N in the corresponding openings until it's firmly attached to the second pipe.
- Insert the first pipe with the attached H-6 connectors in between the H-6A connectors and loosely tighten with the remainings M6-25B and the M6-N to both H-6 and H-6A connectors through corresponding openings.
- Position into the desired angle and tighten completely until the HJ-6A joint set is firmly attached to the first and the second pipe.
You need to enter info before adding a new review.
Products you may need
Need more informations ?
Here's everything you need to know!
