Please select a shopping list
SKU
HJ-6

Pivot tee joint set

Pivot tee joint set steel bk
CDN$2.50

In stock

The HJ-6 is a metal joint set that lets you make a two-pipe intersection with an adjustable angle. This assembly has many applications that range from bracing, hinging, pegging, deportation, and more. This connector is ideal for structures that require a range of motion between 5 and 175 degrees, however for all your applications that need a permanent 45-degree angle, we recommend that you use the HJ-17.

To make an HJ-6, you need to place two H-5 and two H-6 together with two M6-25B bolts and two M6-N nuts. This joint will create a deportation of roughly one inch. This deportation is occasionally used to support fabrication panels and parts. The primary use of this connector is to assemble braces to reinforce the structures. You can also use it to create a door and folding table hinge, but we recommend you check the HJ-12 and HJ-19 before considering the HJ-6.

This connector is relatively easy to connect, but be sure to look for the installation steps so you know how to use it. The HJ-6 is equipped with eight striations for better gripping. The HJ-6 is compatible with most 28mm pipe systems. Don't forget to select the ESD version called HJ-6NP for all you antistatic structures.
More Information
Best SellerYes
Units per boxNA
Needed parts2 (H5) + 2 (H6) + 2 (M6-25B) + 2 (M6-N)
External height inches1 5/16 in (33mm)
External width inches4 5/8 in (117mm)
External depth inches1 5/16 in (33mm)
Unit weight pounds0.497 lbs (0.226 kg)
RoHS certificationYes
RecyclableYes
Frequency of useModerate
Reusable partsYes
range of motion180°
Electric conductivity (ESD)No
MaterialHot rolled steel (SPHC)
Steel hardness (HRB)0.65
FinishGlossy
UV resistanceHigh
System operational temperature-40°F à 122°F (-40°C à 50°C)
Steel treatmentBlack cathodic electrodeposition (Ecoating)
Striations for grip8
1- Make sure you have the following parts:
2 H-6
2 H-5
2 M6-25B
2 M6-N
2 28mm pipes of your choice
1 Allen key or drill equipped with an Allen Key 5mm tip
2- Take a connector H-6 and fix it in the desired location on the P1 pipe.
3-Take a M6-25B bolt and a M6-N nut and insert them into the corresponding openings. Make sure to put the bolt on the more accessible side.
4 - Tighten completely the M6-25B bolt and M6-N nut together until the H-6 connectors attached firmly to the P1 pipe . A force of 9.8 Nm is recommended for this step.
5- Repeat step two with H-5 connectors and P2 pipe.
6-Take a M6-25B bolt and a M6-N nut and insert them into the corresponding openings of h-5 and h-6 connectors. Make sure to put the bolt on the more accessible side.
7- Tighten the M6-25B bolts and nuts M6-N together a few threads , but no more.
8- Position the two H-6 connector in the desired angle.
9- Tighten completely the M6-25B bolts and M6-N nuts together until the HJ-6 attached firmly to the P1 and P2 pipes . A force of 9.8 Nm is recommended for this step.