English CA
Français CA
Español US
English US
Track mount start
- Electric conductivity (ESD)
- Compatible with other 1 1/16 in (28mm) pipe and joint systems
The R40-MS is an ESD steel zinc conveyor mount commonly used at the starting point of roller tracks. This item serves as an anchor between the conveyor and a perpendicular pipe. It is also used when creating L-shape and Z-shape flow racks.
The anchoring section has two little bumps to make sure the support grips the tube firmly. We recommend using an F-A85/8 screw to secure the support on the pipe.
All Flexpipe conveyor R40 accessories are engineered to perfectly fit the R40-RT96
The Flexpipe roller track and its accessories will work on any 28mm pipe and joint systems. Some systems don't have the same conveyor size, so be sure to check the spec sheet to see if your old conveyor parts are compatible.
Learn more on different accessories configuration on the How to build modular flow racks page. Every part of the Flexpipe conveyor system is ESD, allowing you to build antistatic structures for the transportation of electronics and electrical components.
Don't know where to begin? Our flow rack starter kit could be really helpful!
| Box Quantity | 30 |
|---|---|
| Length | 3 1/16 in (78 mm) |
| Height | 1 5/8 in (41 mm) |
| Width | 0.34 lb (0.154 kg) |
| Weight | 0.341 lb (0.155 kg) |
| Non Compatible Brand | Trilogiq |
| Primary Material | Galvanised hot rolled steel (SPHC) |
| Temperature Resistance | -148°F to 428°F (-100°C to 220°C) |
| Electric Conductivity (ESD) | Yes |
| Manufacturing Technique | Pressed and deburring |
You need to enter info before adding a new review.
Products you may need
Need more informations ?
Here's everything you need to know!
