Please select a shopping list
SKU
AO-EMT2

Pipe clamp double mount

Pipe clamp double steel zinc
CDN$0.23
Only 10017 left
  • Secures surfaces to pipe
  • Quick installation
  • 200 units per box (please order individually)

The AO-EMT2 is a double mount metal clamp.

Designed to secure the middle of surfaces to our pipe and joint structures. Unlike store-bought clamps, ours are made to fit our 28 mm pipes perfectly. We recommend that you use the AO-EMT1 for all other applications on the borders of a surface.

We recommend the use of AO-EMT2 when using large surfaces. The clamp will reinforce the surface by adding contact points that will keep it from moving. 

Aesthetically pleasing the clamp is installed on the underside of surfaces, ultimately creating a better look.

Another option is to use them to guide cables/wires.

Antistatic (ESD):
Compatible with EP-96-ST and EP-96-BK

Installation Steps:
See the installation steps tab to view how to install the AO-EMT2

Want to reuse parts of your old system?
The AO-EMT2 is compatible with many other pipe and connector systems. Check the technical information tab to know which systems are compatible and non-compatible with our parts.

Since the AO-EMT2 allows you to secure pipes without drilling in them, you can then quickly disassemble and reuse the same pipes for other projects.

All AO-EMT2 are sold individually.
To make it easier for you, we indicated the quantity included in a box if you want to order a complete box. However, our order system considers a single amount only. Please enter the total amount of clamps you wish to receive (example; 200 units = 1 box).

This product will be discontinued once stock runs out, we suggest AO-EMT1

 






More Information
Best SellerNo
Units per box200
Height inches1 1/8 in (29mm)
Width inches3 1/16 in (78mm)
Depth inches13/16 in (21mm)
Unit weight pounds0.057 lbs (0.026 kg)
Box dimensions inches11 X 9 X 5 in (279mm X 229mm X 127mm)
RecyclableYes
Compatible pipe systemsFlexpipe, Creform, Fastube
None compatible pipe systemsTrilogiq
ReusableYes
Electric conductivity (ESD)Yes
MaterialHot rolled steel (SPHC)
Steel hardness (HRB)0.65
FinishGlossy
System operational temperature-58°F à 185°F (-50°C à 85°C)
Steel treatmentGalvanised
Manufacturing techniqueFolded and welded
  1. Ensure you have the following parts:
    • 1x AO-EMT2
    • 2x F-S81/2
    • 1x 28mm pipe of your choice
    • 1x Surface of your choice
    • 1x Drill w/ #2 square head
  2. Press-fit AO-EMT2 unto P1 pipe in the desired position. 
  3. Fix the AO-EMT2 to the surface S1 with two F-S81/2 screws.