Please select a shopping list
SKU
AO-EMT1

Pipe clamp single mount

Pipe clamp single steel zinc
CDN$0.20
Only 12752 left
  • Secures surfaces to pipe
  • Quick installation
  • 230 units per box (please order individually)

The AO-EMT1 is a single mount metal clamp.

Designed to secure surfaces to our pipe and joint structures. Unlike store-bought clamps, ours are made to fit our 28 mm pipes perfectly.

Aesthetically pleasing the clamp is installed on the underside of surfaces, ultimately creating a better look.

Another option is to use them to guide cables/wires.

Antistatic (ESD):
Compatible with EP-96-ST and EP-96-BK

Installation Steps:
See the installation steps tab to view how to install the AO-EMT1

Want to reuse parts of your old system?
The AO-EMT1 is compatible with many other pipe and connector systems. Check the technical information tab to know which systems are compatible and non-compatible with our parts.

Since the AO-EMT1 allows you to secure pipes without drilling in them, you can then quickly disassemble and reuse the same pipes for other projects.

All AO-EMT1 are sold individually.
To make it easier for you, we indicated the quantity included in a box if you want to order a complete box. However, our order system considers a single amount only. Please enter the total amount of clamps you wish to receive (example; 230 units = 1 box).

More Information
Best SellerNo
Units per box230
Height inches1 1/8 in (29mm)
Width inches2 1/4 in (57mm)
Depth inches13/16 in (21mm)
Unit weight pounds0.044 lbs (0.020 kg)
Box dimensions inches11 X 9 X 5 in (279mm X 229mm X 127mm)
RecyclableYes
Compatible pipe systemsFlexpipe, Creform, Fastube
None compatible pipe systemsTrilogiq
ReusableYes
Electric conductivity (ESD)Yes
MaterialHot rolled steel (SPHC)
Steel hardness (HRB)0.65
FinishGlossy
System operational temperature-58°F à 185°F (-50°C à 85°C)
Steel treatmentGalvanised
Manufacturing techniqueFolded and welded
  1. Ensure you have the following parts:
    • 1x AO-EMT1
    • 1x F-S81/2
    • 1x 28mm pipe of your choice
    • 1x Surface of your choice
    • 1x Drill w/ #2 square head
  2. Press-fit AO-EMT1 unto P1 pipe in the desired position. 
  3. Fix the AO-EMT1 to the surface S1 with one F-S81/2 screw.