Please select a shopping list
SKU
AI-SUPPORT

Embed bracket support

Embed bracket steel zinc
CDN$0.80
Only 8535 left
  • Embed surfaces
  • Great for panel installation
  • Increase surface support

The AI-SUPPORT is a metal anchor joint.

It can be used to increase the number of supporting points for surfaces on any kind of structure. We use it in collaboration with the AI-CORNER to create embedded surfaces.

Great for small to medium-sized surfaces that are rigid enough not to bend in the middle, however with larger sized surfaces where heavier loads may be applied the AI-CENTER might be the better alternative.

Antistatic (ESD):

Compatible with EP-96-ST and EP-96-BK

Installation Steps:
See the installation steps tab to view how to install the AI-SUPPORT

Want to reuse parts of your old system?
The AI-SUPPORT is compatible with many other pipe and connector systems. Check the technical information tab to know which systems are compatible and non-compatible with our parts.

 

More Information
Best SellerNo
Units per box100
Height inches7/8 in (22mm)
Width inches2 1/2 in (64mm)
Depth inches1 11/16 in (43mm)
Unit weight pounds0.154 lbs (0.070 kg)
Box dimensions inches11 X 9 X 5 in (279mm X 229mm X 127mm)
RecyclableYes
Compatible pipe systemsFlexpipe, Creform, Fastube
None compatible pipe systemsTrilogiq
ReusableYes
Electric conductivity (ESD)Yes
MaterialHot rolled steel (SPHC)
Steel hardness (HRB)0.65
FinishGlossy
System operational temperature-58°F à 185°F (-50°C à 85°C)
Steel treatmentGalvanised
Manufacturing techniqueFolded and welded
  1. Ensure you have the following parts:
    • 1x AI-SUPPORT
    • 1x F-A85/8
    • 1x F-S81/2
    • 1x 28mm pipes of your choice
    • 1x Surface of your choice
    • 1x Drill w/ #2 square head
  2. Press-fit an AI-SUPPORT on the P1 pipe in the desired position.
  3. Fix the AI-SUPPORT to the P1 pipe with one F-A85/8 screw.
  4. Install the S1 surface of the AI-SUPPORT.
  5. Fix the S1 surface to AI-SUPPORT with one F-S81/2 screw