Bolt M12 (12 mm) Length 4" (100 mm)
The foot is installed on the outside of the pipe.
Specifically designed to gain space by being able to be placed side by side to another structure or up against a wall.
The AF-OLEV should be avoided on soft surfaces, where it can be replaced by the AP-ICAP or the AF-RUB.
See the installation steps tab to view how to assemble the AF-OLEV.
Want to reuse parts of your old system?
The AF-OLEV is compatible with many other pipe and connector systems. Check the technical information tab to know which systems are compatible and none-compatible with our parts.
|Units per box||100|
|Height inches||1 2/3 in (42mm)|
|Width inches||1 1/4 in (32mm)|
|Depth inches||1 1/4 in (32mm)|
|Unit weight pounds||0.286 lbs (0.130 kg)|
|Box dimensions inches||11 X 9 X 5 in (279mm X 229mm X 127mm)|
|Compatible pipe systems||Flexpipe, Creform, Fastube|
|None compatible pipe systems||Trilogiq|
|Electric conductivity (ESD)||Yes|
|Material||Hot rolled steel (SPHC)|
|Steel hardness (HRB)||0.65|
|System operational temperature||-58°F à 185°F (-50°C à 85°C)|
|Manufacturing technique||Folded and welded|
- Ensure you have the following parts:
- 1x AF-OLEV
- 1x 28mm pipe of your choice
- 1x Mallet
- Insert the AF-OLEV completely into P1 pipe with the help of a mallet
- Adjust height if needed.
Need more informations ?
Here's everything you need to know!